Car Repair Guide: Replacing Headlight Bulb on a Ford Focus 2011

Issue: Burned out headlight bulb

In this guide, we are going to demonstrate how to replace a burned out headlight bulb on a Ford Focus 2011. The process is simple and can be accomplished with a few basic tools.

Tools Required:

• New headlight bulb (H11 bulb is recommended for the 2011 model)
• A pair of protective gloves
• Phillips-head screwdriver or a small ratchet and socket

Steps:

Step 1: Remove the Headlight Assembly

Using the Phillips-head screwdriver or ratchet and socket, remove the screw situated at the top of the headlight assembly and gently pull the headlight towards you.

Step 2: Remove the Burnt Bulb

Wearing the protective gloves, turn the bulb counterclockwise and remove it from the socket.

Step 3: Insert New Bulb

Insert the new bulb into the socket (avoid touching the glass). Turn it clockwise until it locks into place.

Step 4: Reinstall the Headlight Assembly

Place the headlight assembly back into its proper placement and screw it back in.

Step 5: Test the New Bulb

Finally, turn on your car and check if the new bulb is functioning correctly. If it is, you've successfully replaced your headlight bulb!

Safe driving!